Zobrazit minimální záznam

dc.contributor.authorStaněk, Luboš
dc.contributor.authorKrajíček, Tomáš
dc.contributor.authorDvořák, Tomáš
dc.date.accessioned2023-04-15T00:03:03Z
dc.date.available2023-04-15T00:03:03Z
dc.date.issued2022
dc.identifier.issn1211-8516 Sherpa/RoMEO, JCR
dc.identifier.urihttps://repozitar.mendelu.cz/xmlui/handle/20.500.12698/1676
dc.description.abstractThis study aims to provide comprehensive and practical information on particular mechanization means used in the maintenance of permanent grass stands, namely grass cutting technologies without the collection of cut grass biomass - mulching. A sample consisting of six machines classified into three categories (uniaxial tool carriers, single-axle small tractors, cutting machines with a zero turning radius) was tested in practice and functional and operational aspects of the machines were studied on different localities of permanent grass stands. Data measured in the individual machines were used to calculate consumption [l/ha], consumption [l/mth], consumption [l/l of cut biomass] or performance [ha/hour]. The measurements took place on two sites: a site with the permanent grass stand unkempt for a long time and a site regularly maintained by mulching. The study was conducted in the cadastral area of Ostrava City situated in the NE part of the Czech Republic. Results of the study show that the total fuel consumption [l/ha] in the individual mowing machines always at all times higher on plots that were unkempt for a long time. The overall comparison of fuel consumption [l/mth] of the individual types of cutting machines between the localities showed that nearly all tested cutting machines had a higher consumption on sites with permanent grass stands unkempt for a long time. The performance [ha/h] of all cutting machines was higher on the sites that were regularly maintained by mulching in the past.en
dc.format83-95
dc.publisherMendelova univerzita v Brně
dc.relation.ispartofActa Universitatis Agriculturae et Silviculturae Mendelianae Brunensis
dc.relation.urihttps://doi.org/10.11118/actaun.2022.008
dc.rightsCC BY-NC-ND 4.0
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/
dc.subjectgrass cuttingen
dc.subjectmulchingen
dc.subjectmaintenance of grass standsen
dc.subjectpermanent grass standen
dc.subjectgrass standen
dc.subjectgrass moweren
dc.titleSuitability of Using Mechanization Means for the Maintenance of Grass Stands by the Method of Mulchingen
dc.typeJ_ČLÁNEK
dc.date.updated2023-04-15T00:03:03Z
dc.description.versionOA
local.identifier.doi10.11118/actaun.2022.008
local.identifier.scopus2-s2.0-85144573168
local.number2
local.volume70
local.identifier.obd43922837
local.identifier.e-issn2464-8310
dc.identifier.orcidStaněk, Luboš 0000-0001-6863-4139
dc.identifier.orcidKrajíček, Tomáš 0000-0002-3265-2260
local.contributor.affiliationAF
local.contributor.affiliationLDF


Soubory tohoto záznamu

Thumbnail

Tento záznam se objevuje v následujících kolekcích

Zobrazit minimální záznam

CC BY-NC-ND 4.0
Kromě případů, kde je uvedeno jinak, licence tohoto záznamu je CC BY-NC-ND 4.0