Zobrazit minimální záznam

dc.contributor.authorHudeček, Pavel
dc.contributor.authorDostál, Petr
dc.date.accessioned2022-01-22T01:02:21Z
dc.date.available2022-01-22T01:02:21Z
dc.date.issued2017
dc.identifier43912499
dc.identifier.issn1211-8516 Sherpa/RoMEO, JCR
dc.identifier.urihttps://repozitar.mendelu.cz/xmlui/handle/20.500.12698/1453
dc.description.abstractDiscover problems of welds is not so easy from time to time. Specially, If welding was made in rough environmental conditions such as high temperature, humidity and dusty wind. It is necessary to provide good conditions to realize basic step of welding. For welding, have been used welding procedures specification and procedure qualification record. However, dificult conditions, documentations rightness or human errors are always here. Common weld defects like cracks, porosity, lack of penetration and distortion can compromise the strength of the base metal, as well as the integrity of the weld. According of site inspection, there were suspicion of intercrystalline corrosion, inclusions, leaker or segregation in root of weld, root weld stretches to the pipe inside, the welded pipes are not in axially level, the not proper surface treatment after welding and keep the intervals between single welds to not overheat the pipes.en
dc.format25-33
dc.publisherMendelova univerzita v Brně
dc.relation.ispartofActa Universitatis Agriculturae et Silviculturae Mendelianae Brunensis
dc.relation.urihttps://acta.mendelu.cz/media/pdf/actaun_2017065010025.pdf
dc.rightsCC BY-NC-ND 4.0
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/
dc.subjectDeficienciesen
dc.subjectGrain boundariesen
dc.subjectMicrostructureen
dc.subjectPlugged surfaceen
dc.subjectWeld jointen
dc.titleDetermination of grain size and resistance to corrosion of stainless steel welded pipesen
dc.typeJ_ČLÁNEK
dc.date.updated2022-01-22T01:02:21Z
dc.description.versionOA
local.identifier.doi10.11118/actaun201765010025
local.identifier.scopus2-s2.0-85015864677
local.number1
local.volume65
local.identifier.obd43912499
local.identifier.e-issn2464-8310
dc.project.IDIGA TP 4/2014: Analysis of degradation processes of modern materials used in agricultural technology
dc.identifier.orcidDostál, Petr 0000-0001-7489-3591
local.contributor.affiliationAF


Soubory tohoto záznamu

Thumbnail

Tento záznam se objevuje v následujících kolekcích

Zobrazit minimální záznam

CC BY-NC-ND 4.0
Kromě případů, kde je uvedeno jinak, licence tohoto záznamu je CC BY-NC-ND 4.0